Stone steps are a beautiful addition to the hillside.Stone steps make it easier for people to get back and forth between the top and the bottom of the mountain and also prevent soil erosion.Stone steps come in all shapes and colors.You can design interesting patterns, including fan-shaped, curved or blunt dentate boundaries.
Please check with local construction department before designing your stone steps.All necessary permits must be obtained before construction.Decide whether stone steps should be straight uphill or curved uphill. It is easier to walk if you have multiple staircases and can provide several open platforms. You can beautify the space with flowers and shrubs.These small gardens will attract birds and good insects such as butterflies, bees, ladybugs and mantis.
Dig from the bottom of the hill.Dig a 90-degree Angle, the depth of the rock width, and each staircase should be wide enough for two people to pass through at the same time without touching each other, about 4 to 6 feet.
Spread the sand over the cut steps and use a compactor to compress the sand and soil.This will prevent settlement after installation of stone steps due to uneven installation.
Lay stones on the steps.If you are using hexagonal, petal-shaped, pentagonal or square blocks, make sure they provide 10 to 12 inches of space.This is the minimum safe depth of a hillside.Refill with sand and gravel.Use the compactor to re-compaction.
Each step repeats these actions until you reach the first step platform, and if there is no step platform, continue the previous action.
Build a landing platform for every 8 feet up as needed.Dig 6 to 8 inches long and wide, use 2 by 6 inches of wood and fill with gravel, then lay your ideal stone module.
If the space allows for an ornamental pavilion on the top of the mountain.